Bose Lifestyle DVD Home Entertainment Systems - Manual (Page 29)

AM259776_01_V.pdf October 30, 2001 27
Changing System Settings
Changing TV/VCR/AUX/TAPE settings
To change the settings for the TV, VCR, AUX, or TAPE source, press the Settings button while
one of these sources is selected. Figure 9 shows you a map of the settings menu when one of
these sources is selected.
Figure 9
The TV / VCR / AUX /
TAPE settings menu
Menu Item Settings What each setting does
Sleep Timer: Off
mm:ss
Timer not active.
Turns system off after set time expires (10 to 90 minutes).
TV, VCR, AUX or
TAPE Status: Displays information about the TV / VCR / AUX / TAPE
source.
Audio Setup See “Making audio adjustments” on page 28.
Analog Input: -6/-3/0/3/6 Adjusts the TV / VCR / AUX / TAPE analog audio level. Use
this adjustment if an external source sounds much louder or
softer than the other sources.
Digital Input: -6/-3/0/3/6 Adjusts the TV / VCR / AUX / TAPE digital audio level. Use
this adjustment if an external source sounds much louder or
softer than the other sources.
System Setup See “Changing the system setup” on page 30.
Sleep Timer
TV/VCR/AUX/TAPE Status
Audio Setup
System Setup
Analog Input
Settings
AUDIO Surround Speakers
SOURCE / INPUT
MENU / NAVIGATION
Seek
Volume
PLAYBACK Pause Play Stop
Channel
Chapter
Preset Track
Previous
Tune
Guide Exit
Power Power Power
TV Input
DVD Menu
Repeat
FM/AM Tape
2-3-5 + -
Mute Mute All
Enter
1 2
0
3
4 5 6
7 8 9
Shuffle
Settings
CD/DVD
AUX VCR TV
On
Off
Settings (Source)
Digital Input