Boot screen, 5 setup sensors, 6 the color palette – PLX Devices DM-100 OBDII User Manual
Page 23: 7 wallpaper backgrounds, 8 sensor table, 5 boot screen
Users Guide: iMFD User Guide
Version 1.0 Jan 1, 2008
www.plxdevices.com
(408)745-7591
23
7.4.5
Boot Screen
This option allows you to select from the 8 available wallpapers stored on your unit to display for 5
seconds during boot up.
7.5 Setup Sensors
See section 3.4
7.6 The Color Palette
UP – Exits the color palette mode and does not save changes
DOWN – Saves changes
LEFT – Toggles to select the desired color by moving the cursor left. The cursor will wrap
and increment up one row.
RIGHT – Toggles to select the desired color by moving the cursor right. The cursor will wrap
and increment down one row.
7.7 Wallpaper Backgrounds
Up to 8 wallpaper images can be uploaded to the DM-100. The DM-100 comes default with 8 standard
images, however you may use ANY color image formatted to the size of (160 x 128 pixels) as your
wallpaper background. You may want to upload your company’s logo, a picture of your vehicle, or any
other image your imagination takes you. Your custom wallpaper can be uploaded to the DM-100 via USB
port with the
You have the option to select a different wallpaper
background for analog gauges, digital gauges, plot gauges and 4 parameter gauges. The wallpaper image
will automatically be superimposed under the gauges.
7.8 Sensor Table
As more sensor modules are available the Sensor Table must be updated for the DM-100 to properly
interpret and detect new sensors. You will know if your sensor table needs to be updated if your DM-100
does not properly detect your new sensor module in the setup sensors menu (section 3.3). The sensor
table is stored in the flash memory of the DM-100 control box and can be updated by connecting to the
USB port on your PC. The
included on your CD, is used to upload the
updated sensor table. Please refer to the DM-100/200 Utility user guide for more details.