MK Diamond Canoga 193 Electric User Manual
Page 19
19
193 SERIES CONCRETE MIXER
INSPECTION & START-UP
Plug the other end of the extension cord into a 120 VAC G.F.C.I. protected receptacle. Remember the
power requirements for this electric motor is 120 VAC, 60 Hz. The use of any other input voltage will
severely damage the motor.
DANGER
WARNING
NEVER touch the power cord with wet hands or while standing in water when it is connected to a
power source. The possibility exists of electrical shock (electrocution) even death. NEVER spray
water directly on the electric motor.
WARNING
NEVER use a worn or frayed extension cord.
NEVER operate mixer with V-belt cover removed.
ON/OFF SWITCH
ALWAYS read the label on the electric motor before applying power. The label will indicate the proper
power requirements for the motor. Remember the use of any other input voltage will severely damage the
motor.
To prevent tripping of personnel,
position the extension cord so that it
lays flat and is not curled
underneath the mixer.
Set the electric motor’s ON/OFF
switch to the ON position.