KV2 Audio SL Brackets - Manual (Page 7)

SL Br
ack
ets
SL Ground Stack kit
7
SL Ground Stack kit
SL GROUND STACK kit (KVV 987 320)
The SL Ground Stack consists of a two supporting
legs, connecting to a metal strip, that has apertures
with fixed points to allow the securing of the multi-
ple stacked SL215 Bass enclosures with an SL412
and to prevent tipping when using the SL system
stacked, away from the wall, or stacked on a
VHD2.21 enclosure.
Assemble the Ground Stack by either inserting two
supporting legs and fixing with the metal strip,
using two knobs with screws as shown on the
diagram.
Before it is possible to place the SL2.15 speaker into
a Ground Stack, it is necessary to replace four M10
screws with the M10 screws with hole (included
with SL Ground Stack) using the included Allen key.
Settle the SL2.15 into the Ground Stack
and secure it using four Quick-lock-pins.
SL Ground Stack allows stacking:
- 1xSL2.15, 1xSL412
- 2xSL2.15, 1xSL412
- 1xVHD2.21, 2xSL2.15, 1xSL412
- 1xVHD2.21, 1xSL2.15, 1xSL412
- 2xVHD2.21, 2xSL2.15, 1xSL412
SL GROUND STACK - assembling
Replacing 4x M10 bolts with M10 with hole
Settlement SL2.15 into Ground Stack
S1x VHD2.21, 1X SL2.15, 1x SL412 Ground Stack
SL412
SL2.15
VHD2.21
2x QUICK LOCK
PINS - 6MM
2x HEX SCREW
WITH HOLE
1x KNOB
WITH SCREW
2x HEX SCREW
SL2.15
SL2.15