Induro AT Tripod - Manual

CT–SERIES & AT–SERIES TRIPODS
OPERATIng InSTRuCTIOnS
IN
D
U
R
O C
am
er
a S
up
po
rt G
ea
r
|
8 W
es
tc
he
st
er P
la
za
, E
lm
sf
or
d, N
Y 1
05
23
|
T
91
4-
34
7-
33
00
|
F
91
4-
34
7-
33
09
|
in
fo
@
in
du
ro
ge
ar
.c
om
|
in
du
ro
ge
ar
.c
om
Thank you for making Induro your choice for
professional photographic gear. Your Induro gear
is manufactured to provide years of dependable
service. In order to obtain optimum satisfaction
and performance we suggest that you carefully
read these instructions and provide them to
anyone who may also use your Induro gear.
Interchangeable Spiked and Rubber Feet
(select models) (MAIN FIGURE)
Most Induro tripods include interchangeable
Stainless Steel Spiked or Rubber Feet.
They provide the right contact depending
on the surface or terrain that the tripod
will be used in. To remove the Rubber Feet
simply unscrew each Rubber Foot counter-
clockwise and replace with the provided
Spiked Feet. Tighten the Spiked Feet using
the included Wrench.
Accessory Short Column
(FIGURE 9)
An accessory Short Column is available to
replace the Standard Center Column for
performance operation and and low level
camera positioning. To install, first remove
Tripod Head, Locking Nut, Top Plate, Mounting
Screw and Weight Hook. Loosen the Center
Column Locking Knob and pull the Center
Column out. Insert the new Short Column in
place, tighten Center Column Locking Knob
and reassemble Top Plate mounting parts,
Tripod Head, and Weight Hook.
Multi-Function Spider Casting
The heavy-duty, extra-wide Magnesium Alloy
cross-braced center casting was designed
to provide the greatest core stability for
your Induro Tripod. In addition, it includes
an integral Bubble Level, removable
Carrying Strap Loop and a dual threaded
Accessory Mount.
USER NOTICE
Do not exceed the maximum specified load c
capacity (see specifications on the package
label or visit www.indurogear.com).
Always ensure that Leg and Head Locks c
are tightly engaged before mounting any
gear on your Tripod.
Do not use any Tripod below temperatures c
of −4°F or above +158°F (−20°C / +70°C).
Always clean and dry any Tripod after it c
has been exposed to wet, dusty, sandy
or salty conditions. Your Tripod is not
recommended for use in salt water. If
required, clean tripod using a mild soap
solution applied with a soft cloth, rinse
with fresh water and dry with soft towel.
Remove any dust, dirt or sand from all Leg
Locks, Leg Sections and all moving parts.
Do not leave any Tripod in the sun c
for prolonged periods and avoid high
temperature exposure.
Avoid leaving any Tripod or Monopod c
unattended in areas where people could
trip over the gear and get hurt.
Remove camera, lens, and all gear from c
any tripod when transporting.
For your safety, don’t let your Induro c
gear come in contact with any electrical
power source.
Specifications and design are subject to change without notice.