iCreation G-700 user vanual - Manual (Page 13)

49 12
AZ
The screen shows various icons.
az
The landline is engaged.
The cellphone line is engaged.
Indicates the case in which letters will be
entered (upper case or lower case).
Battery charge level.
Fully charged status Low battery
Very low battery warning
Sleep mode is activated.
Indicates that only digits can be entered.
Signal strength. The greater the number of
bars, the stronger the signal.
The microphone is temporarily muted during a
conversation.
Speakerphone is enabled.
There are one or more missed calls.
Keypad is locked.
Alarm clock is set.
0-9
Handset Screen
or
Resetting the Handset or the Base
If you reset the handset or the base, all of the user-selectable
features restore to the factory settings: When resetting the
handset, the incoming and outgoing lists will be erased, but the
Contacts and Flash time do not reset.
. It is useful
for the following purposes:
If you have made many wrong settings and you want to
restore the handset to the factory presets.
If the phone shows logical malfunctions (incorrect symbols
on the display, incorrect behavior, etc.), the problem can be
caused by a switching power supply noise or an electrostatic
spike that can temporarily alter the memory of the internal
microprocessor. Resetting could solve the problem.
The handset and base can be reset independently
Press to display the main menu items.
Press to choose , then press .
Press or to choose , then
press .
The handset asks you to enter the current handset PIN code
(the default PIN is
). Use the numeric keys to enter and
press . " " appears. Press
to confirm.
Press .
Menu
Select
Up Down Reset handset
Select
1590
OK Reset ?
OK
beneath
beneath
beneath
beneath beneath
1
2
3
4
5
Resetting the Handset
Handset