Humanscale Quick Track Installation - Manual

1.
Once Track and Rear Rubber Stopper have been installed (see
Keyboard System Installation Instructions), slide Keyboard Mechanism
or CPU Holder into Track.
2.
Slide Quick Track Front Cover into Track (a).
3.
With Quick Track Pin Handles pointing away from the Track (as
shown), insert Pins into keyholes on front of Track (b).
4.
Turn Pins 90˚ inward to lock in place. Your Quick Track
system is now installed.
5.
To Remove, simply reverse above steps.
Please Note: To remove the keyboard system from its track, first remove
the keyboard and mouse. Next, adjust the keyboard platform to its highest
position and then slide the whole unit out of the track.
www.humanscale.com
Quick-Change Pins
Quick-Change
Front Cover
(a)
(b)
Quick Track
Installation Instructions
Track
www.humanscale.com
Quick Track
Installation Instructions
HSI-QT-906-2
Quick-Change Pins
Quick-Change
Front Cover
(a)
(b)
Track
1.
Once Track and Rear Rubber Stopper have been installed (see
Keyboard System Installation Instructions), slide Keyboard Mechanism
or CPU Holder into Track.
2.
Slide Quick Track Front Cover into Track (a).
3.
With Quick Track Pin Handles pointing away from the Track (as
shown), insert Pins into keyholes on front of Track (b).
4.
Turn Pins 90˚ inward to lock in place. Your Quick Track
system is now installed.
5.
To Remove, simply reverse above steps.
Please Note: To remove the keyboard system from its track, first remove
the keyboard and mouse. Next, adjust the keyboard platform to its highest
position and then slide the whole unit out of the track.
HSI-QT-906-2