H&H Specialties 100 Series Track Installation Instructions - Manual (Page 5)

5
CENTER PIPE SUPPORT
Formed steel bracket used to support tracks
at overlap.
No. 126 - Zinc plated.
No. 126B - Black finish.
CEILING SPLICE
To align and lock track sections together on
ceiling mounted tracks. 1 pair pictured.
Note: Cannot be used with No. 132 Overlap
Master or No. 10 Pivot Device due to
interference with the wheels.
No. 127 - Zinc plated.
No. 127B - Black finish.
TRIM CHAIN
3 links No.10 single jack chain added
to carriers to provide 3" of curtain height
adjustment.
No. 135 - Zinc plated.
No. 135B - Black finish. No. 134 BLACK SIDE MASKING
MASTER CARRIER
No. 117 Master Carrier with 3-3/4" x 5-3/4"
steel plate for attaching side masking frame.
Supplied with 2 rope clamps.
No. 114 OPERATING LINE
1/4" diameter black polyester braided over
solid aramid core for manual operation.
OPERATING CABLE
Black polyester jacket braided over 3/32"
galvanized aircraft cable. For use with
motorized tracks.
No. 115 - 3/16" diameter
No. 125 - 1/4" diameter
SINGLE CARRIER
2 nylon-tired shielded ball bearing wheels
riveted to steel body with swivel hook
and trim chain. Supplied with 1 rubber
bumper.
No. 116 - Zinc plated.
No. 116B - Black finish.
MASTER CARRIER
4 nylon-tired shielded ball bearing wheels
riveted to steel body with 2 swivel hooks and
trim chains. Supplied with 2 rope clamps
and 1 rubber bumper. 1 pair required for
overlapping tracks.
No. 117 - Zinc finish.
No. 117B - Black finish.
OVERLAP MASTER
1-3/4" O.D. nylon wheels riveted to steel
body with 9" offset arm. Used to overlap
curtains on continuous track. Clamps
provided to secure operating line. 1 pair
required for overlapping curtains.
No. 132 - Zinc plated.
No. 132B - Black finish.
No. 130 ROUND RUBBER BUMPER
1/8" neoprene bumper placed between
carriers to reduce noise.
PIVOT DEVICE
Heavy steel construction with nylon wheels.
Supplied with brackets for 1-3/8" O.D. pipe
or tubing (6' max. recommended length).
Allows masking draperies to be rotated to
any angle.
Working Load Limit: 75 pounds.
No. 10 - Zinc plated.
No. 10B - Black finish
BRAKE KIT
Spring equipped arm with neoprene pad. Add
to pivot device to prevent undesired movement
along track.
No. 10BK - Zinc plated.
No. 10BKB - Black finish.
INDEXING PIVOT DEVICE
Pivot device with special plate to index rota-
tion at 22-1/2 degree increments. Supplied
with brackets for 1-3/8" O.D. pipe or tubing
(6' max. recommended length).
Working Load Limit: 75 pounds.
No. 10X - Zinc plated.
No. 10XB - Black finish.
No. 454 Curtain Machine
See pages 50-61
for curtain machines
REAR FOLD GUIDE
Allows curtain to fold at offstage edges. Supplied
with 1 rubber bumper.
No. 112 - for use with 1/4" operating line.
No. 112B - same as 112 in Black.
No. 113 - for use with 3/16" operating cable.
No. 113B - same as 113 in Black.
Note: Cannot be used with No. 132 Overlap
Master.
END STOP
Bolt with horizontal pipe spacer to prevent
carriers from traveling beyond desired loca-
tion. For use with walk-along tracks.
No. 111 - Zinc plated.
No. 111B - Black finish.
&