GLOBALSAT GH-625XT v3.0 Quick Start - Manual (Page 13)

2. Click ‘’ TRACK BACK?’’ and then press
‘’Enter button’’.
3. Chose ‘’ Backward’’ or ‘’ Forward’’ to start
your track back. It will take some times to
compress the record in order to optimize
the memory usage.
4. The screen will show map. Sometimes you
may press OK or ESC button to skip or
back the waypoints if you locate the
intercross section
You may also go to MENU mode to
NAVIGATION>ROUTES> ROUTES
SETTING to enable AUTO JUMP, if you
would like to have system to recognize the
closest point to switch then.
5. Press ‘’Page button’’ display the distance
and time for you to reach destination on
the right part of screen. The direction of
destination waypoint is shown by the arrow
sign of the compass.