GLOBALSAT Training Gym Pro v1.2 Instruction Manual - Manual (Page 5)

Software Instruction Manual
Page 5
To check Computer Management ＞ Device Manager, you may see the STM Virtual COM port has been
detected.
For GB-1000:
The USB driver is required to recognize your device via USB when it is connected to your PC.
1. Download the USB driver from our official website: www.globalsat.com.tw
2. Execute the downloaded USB driver.
3. Follow the on-screen instructions to complete the installation.
To check Computer Management ＞ Device Manager, you may see the Virtual COM port has been detected
while the device was plugged in.
1.2 Installing the Training Gym Pro
Install Framework v2.0 or above
To check the Microsoft Framework version in your system go to: ’’Control Panel > Add/Remove Programs’’
Note: Originally, the Framework version in Windows XP SP2, SP3 and Vista or above should be version 2.0.
Installing the GS-Sport Training Gym Pro
Use auto-run to install GS-Sport Training Gym Pro or select the installation file from the CD-ROM.
Step 1: Click Setup.exe to install the Training Gym Pro.