GLOBALSAT GD-102 User Manual - Manual (Page 43)

43
Chapter 5: Troubleshooting
When GD-102 can not be turned on or does not work properly,
Please check if the battery is installed correctly.
1.
It requires more time to get GPS fix while GD-102 is moving. Please keep
GD-102 stationary when powering on GD-102. This will shorten the time to
get a GPS fix.
2.
Keep GD-102 away from excessive moisture and extreme temperatures. Do
not leave it in the closed vehicles or put it under direct sunlight for extended
periods of time. Excessive moisture and extreme temperatures may damage
the GD-102.
3.
If the date and time is not correct, please select the local time zone in the
time zone setting. Ex: PST GMT -8 / Taiwan GMT +8
4.
Do not put GD-102 near the magnetic objects like electric appliances or
magnets. The magnetic objects may cause the GD-102 point to wrong
direction.
5. If the pointed direction is not accurate, please adjust the electronic compass.
6.
If PC Utility can not load route and setting from GD-102 device, please
check the items as below; 1. Driver Installation, 2. Device need to power on,
3. USB Cable connected correctly between PC and device.