Brother HL 3070CW - Manual (Page 53)

Wireless configuration for Windows ® using the Brother automatic installer application (For HL-3070CW)
43
4
i
Confirm the on-screen message and click Next.
j Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
k Press + or - to choose Network.
Press OK.
l Press + or - to choose WLAN.
Press OK.
m
Press + or - to choose SES/WPS/AOSS.
Press OK.
Note
If your wireless access point supports Wi-Fi Protected Setup (PIN Method) and you want to configure your
machine using the PIN (Personal Identification Number) Method, see Wireless configuration using the PIN
Method of Wi-Fi Protected Setup (For HL-3070CW) in Chapter 7.
n The machine will search for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™ for 2 minutes.
o
Put your access point in the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or the AOSS™
mode, depending on what is supported by your access point. Please refer to the instruction manual that
came with your access point.