BELLA 13554 Hot Air Popcorn Maker - Manual (Page 7)

FOr ADDITIONAL BATChES
1. For additional batches, unplug unit. Make sure the popping chamber is empty.
Carefully remove excess popcorn or remaining unpopped kernels.
2. Allow 15 minutes for the Popcorn Popper to cool before continuing to pop additional
batches of popcorn.
3. Then repeat the procedure described previously.
CAuTIONS
• This is a hot air Popcorn Popper. Never add oils, fats, shortening, sugar, or salt
to the popping chamber.
• This Popcorn Popper is designed to be used with regular or premium hot air popcorn;
do not use microwave popcorn in this Popcorn Popper.
• Always use fresh hot air popcorn kernels; stale or dried-out kernels pop poorly
and may cause scorching or smoking.
• It is not necessary to preheat this appliance before using; never plug in or operate unit
when empty.
• Never leave unit unattended while using.
• Always keep lid on base until all popping is complete. Unplug unit before removing
the lid.
• Occasionally, a hot, unpopped kernel may be thrown from the chute. To avoid
any contact with hot kernels, keep face and hands away from the chute,
and keep children away from the unit.
• Use oven mitts or potholders when handling hot surfaces.
uSEr mAINTENANCE INSTruCTIONS
This appliance requires little maintenance. It contains no user serviceable parts.
Do not try to repair it yourself. Contact a qualified appliance repair technician if the product
requires servicing.
CArE AND CLEANINg INSTruCTIONS
1. Unplug and allow unit to cool at least 10 to 15 minutes before cleaning.
2. Wash the Popcorn Popper lid and measuring cap/butter tray in warm, soapy water.
Rinse and dry thoroughly.
CAUTION: Do not wash in dishwasher.
3. Wipe the Popcorn Popper base, including the popping chamber, clean and dry
with a soft dry cloth.
4. Never immerse the Popcorn Popper base in water or other liquid.
5. Do not scour surfaces with steel wool or abrasive cleaners.
STOrINg INSTruCTIONS
1. Unplug unit and allow to cool.
2. Store fully assembled with Popcorn Popper lid in place.
3. Store in its box or in a clean, dry place.
4. Never wrap cord tightly around the appliance. Do not put any stress on cord
where it enters unit, as this could cause cord to fray and break.
6