Bear Archery Compound Bow 2004 - Manual (Page 20)

20
Micro Perimeter Weighted
OneCams have a modular draw
length adjustment. Draw length
changes are made by sim-
ply changing modules; a bow
press may be needed in certain
instances. Accessory modules
are available from your dealers in
one inch draw length increments.
Each module is numbered, with
MS1 being the shortest draw
length module and MS5 being
the longest.
To change modules remove
the two screws from the present
module, remove that module and
replace with a new module. Such
module draw length adjustment
will not affect draw weight.
Additional, fine draw length
(and string stretch) adjustments
can be made by repositioning the
adjustable bowstring mounting
post near the center of the cam.
This changes the weight slightly.
To make such adjustments, it
is first necessary to remove ten-
sion from the harness system
of the bow by relaxing the bow
in a bow press.
Under no cir-
cumstances can this relaxing
of harness system be accom-
plished by simply backing out
limb bolts. A fixed or portable
bow press must be used.
ADJUSTING
DRAW
LENGTH
Micro
Perimeter
Weighted
Cams