Barranca Diamond MK-145 Tile Saw - Manual (Page 4)

4
MK-145 SAFETY
Read and follow all safety, operating and maintenance instructions. Failure to read and follow
these instructions could result in injury or death to you or others. Failure to read and follow these
instructions could also result in damage and/or reduced equipment life.
SaFeTY MeSSaGeS
A safety message alerts you to potential hazards that could hurt you or others. Each safety message is
preceded by a safety alert symbol ( ) and one of three words:
DaNGeR, waRNiNG, or CaUTiON.
You will be KilleD or SeRiOUSlY iNJUReD if you do not follow directions.
You CaN be KILLED or HaRMeD if you do not follow directions.
You CaN be INJURED if you do not follow directions. It may also be used to alert
against unsafe practices.
DaMaGe PReVeNTiON aND iNFORMaTiON MeSSaGeS:
A Damage Prevention Message is to inform the user of important information and/or instructions that
could lead to equipment or other property damage if not followed. Information Messages convey
information that pertains to the equipment being used. Each message will be preceded by the word
NOTe, as in the example below.
NOTe: Equipment and/or property damage may result if these instructions are not followed.
GeNeRal SaFeTY PReCaUTiONS aND HaZaRD SYMBOlS
In order to prevent injury, the following safety precautions and symbols should be followed at all times!
SaFeTY PReCaUTiONS
alwaYS read this Owner’s Manual before operating the machine.
alwaYS keep the Blade Guard in place.
ReMOVe aDJUSTiNG KeYS aND wReNCHeS
Form a habit of checking to see that keys and adjusting wrenches are removed from the
power tool before it is turned on.
KeeP wORK aRea CleaN
Cluttered work areas and benches invite accidents.
DO NOT USe iN DaNGeROUS PlaCeS
DO NOT use power tools in damp or wet locations nor expose them to rain. Always keep
the work area well lighted.
DANGER
WARNING
CAUTION