Allen&Heath GL2200 USER GUIDE - Manual (Page 20)

GL2200 U SER G UIDE 20
(compressor)
L R
FOLDBACK
GROUPS 3 & 4
pre-fade aux sends
GRAPHIC EQUALISERS
inserts
R
L
2 TRACK RECORDER
MULTITRACK RECORDER
playback
record
CD PLAYER
inputs
5
L R
R L 4 2
RETURN STEREO
5 6
M
R INSERT L INSERT
SEND
INSERT
MONITOR
2-TRACK
RETURN
3 4 2 1
INSERT
3
INSERT
1
INSERT
RETURN STEREO
MIC
L/MONO
16
TALKBACK
12 MIC
R
STEREO IN
15 L/MONO
14
MIC/LINE
DIRECT
10 OUT
11
R
IN
9
DIRECT OUT
MIC/LINE IN
INSERT
STEREO
13
IN LINE IN
10 INSERT
LINE IN
9
direct outs
MIC/LINE
DIRECT
INSERT
DIRECT OUT 8
MIC/LINE IN
7
DIRECT OUT
MIC/LINE IN
INSERT
LINE IN
8 INSERT
LINE IN
7
MIC/LINE
DIRECT
6 OUT 5 OUT
IN IN
DIRECT
4 OUT
MIC/LINE IN
INSERT
LINE IN
6
LINE IN
5 INSERT
LINE IN
4
MIC/LINE
DIRECT
INSERT
3
DIRECT OUT
MIC/LINE IN
2
DIRECT OUT
MIC/LINE IN
INSERT
LINE IN
3 INSERT
LINE IN
2
1 OUT
IN
LINE IN
1
Post fader aux sends
EFFECTS
Post fader aux sends
EFFECTS
stereo chans
returns
6
returns
insert
PROCESSOR
SIGNAL
4
2
MONO
GROUPS 1 & 2
MONO
3
1
PRE
AUX
POST
GRAPHIC EQUALISERS
Graphic equalisers are used to
compensate for adverse room
acoustics. These devices help
reduce acoustic feedback and
enhance the clarity of the
sound.
F
RONT OF
H
OUSE
AUX SENDS
Select aux 1-4 post-fade to access 4
effects processing devices. Use the
stereo returns and stereo inputs to add
the effects to L-R and mono mix.
Select aux 5-6 pre-fader for foldback
monitor sends.
AUX MASTERS
These switches are recessed
to avoid accidental operation.
Set using a pen tip or pointed
object.
Set the AUX REVERSE
switches to the up position for
conventional aux/group
operation
Set the LR SUM MONO
switch to up for mono out
(L+R sum)
2-TRACK RECORDING AND
INTERMISSION REPLAY
Use the console 2-track send and return
sockets for connecting a cassette or
DAT recorder and a CD player. Connect
the CD player to the console two track
return sockets for intermission replay.
This does not affect the recording
process.
MULTITRACK RECORDING
Connect the inputs of the multitrack to the
channel direct out sockets to record each
channel on a separate track for mix down later.
INSERTS
The inserts on the
channels and outputs may
be used for outboard
effects and signal
processing devices such
as compressors, limiters
and graphic equalisers.
This example shows the 4 groups,
L - R and Mono outputs feeding a
7-stack FOH amplification system.
The groups provide independent
control of the additional left and
right loudspeaker stacks or may
be used for zone feeds or for
subgrouping to the L-R mix.