AiM Microtec M206 for SoloDL - Manual (Page 7)

6
4
Microtec “M206” protocol
Channels received by SoloDL connected to Microtec M206 protocol are:
ID CHANNEL NAME FUNCTION
ECU_1 ECU_RPM RPM
ECU_2 ECU_RPM_MEAN Mean RPM
ECU_3 ECU_PROG_RPM Programmed RPM value
ECU_4 ECU_THROTTLE Throttle position
ECU_5 ECU_THROT_VAR Throttle variation
ECU_6 ECU_LAMBDA Lambda value
ECU_7 ECU_ENGINE_TEMP Engine temperature
ECU_8 ECU_AIT_TEMP Intake air temperature
ECU_9 ECU_BARO_PRES Barometric pressure
ECU_10 ECU_VACUUM Vacuum sensor
ECU_11 ECU_MIN_MAP_AT_ON Minimum manifold air pressure at power on
ECU_12 ECU_MAX_MAP_AT_ON Maximum manifold air pressure at power on
ECU_13 ECU_MAP_SAD_AT_ON Manifold air pressure at power on
ECU_14 ECU_MAP_INDX_AT_ON Manifold air pressure index at power on
ECU_15 ECU_RPM_AT_BARO RPM Value corrected at barometric pressure
ECU_16 ECU_TPS_AT_BARO Throttle position at barometric pressure
ECU_17 ECU_RAW_BARO Raw barometric pressure
ECU_18 ECU_RAW_BARO_AD Row barometric pressure AD
ECU_19 ECU_GEAR Engaged gear
ECU_20 ECU_TEROG Erogation time
ECU_21 ECU_TEROG_BASE Erogation time base
ECU_22 ECU_ADVANCE Ignition advance
ECU_23 ECU_TETA_BASE Ignition base angle
ECU_24 ECU_KJ_TH2O Injection time correction from water temperature
ECU_25 ECU_KA_TH2O Offset advance from water temperature