IOGear GWP512 Manual - Manual (Page 32)

Note: The IP Address you assign to all computers
must be in the same IP Address range, and the
Subnet Mask must be the same for all computers on
your network.
For example:
If the first computer is assigned an IP Address of
10.35.1.3 with a Subnet Mask of 255.255.255.0,
then the second computer can be assigned an IP
Address of 10.35.1.4 with a Subnet Mask of
255.255.255.0,.. etc.
29
Installation
4. Select “Obtain an IP address automatically”,
if the network adapter will be linked to a Wireless
AP providing DHCP service. Or, please click “Use
the following IP address” and input an IP address
and subnet mask. IP configuration information
(DHCP or assigned IP address, Gateway and DNS
server IP addresses) is usually obtained from the
corporate IT staff.