IOGear GCL1816KITU - Manual (Page 30)

30 31
On-screen Display (OSD) Operation
OSD Main Screen
When you invoke the OSD, a screen similar to the
one below appears: Trigger OSD
Simply press [Scroll Lock] [Scroll Lock] rapidly.
Note: This hotkey sequence can be changed to
[Ctrl] [Ctrl]. Please refer to Hotkey Setting Mode
(HSM) section.
or
Press [KVM OSD] Button that is located on the left
bottom corner of the built-in keyboard.
OSD Login
By default, the Login and Password are blanks, so
simply press [Enter] [Enter] to login. If you have set
a user name and password on the KVM, simply
enter them and press enter to login.