I.R.I.S. IRISCard Corporate 5 - Manual

English English
This Quick User Guide helps you install and get started with IRISCard™ Anywhere 5 and
IRISCard™ Corporate 5 scanners.
The software delivered with these scanners is:
- Cardiris™ Pro 5 and Cardiris™ Corporate 5 for CRM (for Windows®)
- Cardiris™ Pro 4 (for Mac® OS)
For detailed information about Cardiris™’ full range of features, consult the help file provided
with the software, or the latest User Guides on www.irislink.com/support/userguides.
The descriptions in this guide are based on the Windows 7 and Mac OS Lion operating system.
All information is subject to change without prior notice.
Table of Contents
1. Using the IRISCard™ scanner
2. Using Cardiris™ on a Windows PC
a. Installing Cardiris™
b. Starting Cardiris™
c. Registering Cardiris™
d. Using Cardiris™
3. Using Cardiris™ on a Mac OS computer
a. Installing Cardiris™
b. Starting Cardiris™
c. Registering Cardiris™
d. Using Cardiris™
4. IRISCard™ Scanner Reference Information
5. FAQ and Technical Support
1. Using the IRISCard™ scanner
Before you begin: charge your scanner for 4 hours.
1. Turn on your computer.
2. Connect the scanner to your computer using the USB cable.
3. The orange light is on while charging.
4. When the scanner is fully charged the orange light goes out. Then disconnect
your scanner from the computer.
Preliminary note:
The IRISCard™ scanner is designed to be used on its own, disconnected from any computer.
The documents you scan are stored in the scanner’s internal memory (or optional SD card /
USB flash drive). From there they can be loaded into the Cardiris™ software, as explained
below in topics 2.4 and 3.4.
So, note that the IRISCard™ is not a Twain-based scanner that can be used from within any
application to scan documents. Instead, think of it as a USB storage device that is able to
scan independently.