Bose FREESPACE 4400 - Manual (Page 35)

32 of 66
5.0 Using FreeSpace ® 4400 Installer™ Software
Adds a zone Source Change event
This event allows you to change the source at a specified time on
selected days of the week.
Adds a zone Auto Volume event
This event allows you to turn Auto Volume on or off at a specified
time on selected days of the week.
Programmer’s Note: Do not schedule an Auto Volume
event on a zone that is not set up for Auto Volume.
Programmer’s Note: Events are only saved to the
FreeSpace 4400 system when you click the (Flash
Hardware Configuration) button.
5.5.3 Viewing and changing event
settings
To view any event and change the settings, first click the system
or one of the zone tabs. Then select an event in the list to display
the event settings in the control pane. Now, you can edit the set-
tings just as when an event is added.
5.5.4 Removing events from the list
To remove an event from the list, select the event by clicking on it
and then click the (Remove Event) button.
Programmer’s Note: After changing any event settings
or removing an event from the list, you must flash the
hardware in order for the change to take effect.