Electra Steel Wire Basket (368769, 368787, 368819) - Manual (Page 3)

STEP 1: Installation of fork strut to basket
1) Mount strut legs to bottom of basket with
two 16mm Phillips head screws and the steel
plate buckle
2) Tighten screws using Phillips screwdriver
DO NOT OVERTIGHTEN
STEP 2: Installation of headset bracket
1) Remove stem/handlebar combination
using a 6mm hex wrench
2) Remove top nut using 32, 36mm or
adjustable wrench and put aside
3) Remove steel key washer (if applicable)
4) Install mounting bracket in place of key
washer, lip side faces down on most men’s
bikes, up on most ladies bikes
5) Reinstall top nut using 32, 36mm or
adjustable wrench
6) Reinstall stem/handlebar combination
using a 6mm hex wrench
Note: Most Electra Cruiser models use 1”
headsets while steel-framed Amsterdam models
use 1” and aluminum-framed Amsterdam models
and Townie models use 1 1/8” headsets. If
mounting to a late-model Townie, it is necessary
to remove the conical headset spacer. Put
spacer aside for future use if basket is no longer
installed. If you are unsure of the size of your
headset, contact your local Electra dealer.
ELECTRA BICYCLE COMPANY ® ,LLC. • 3275 CORPORATE VIEW, VISTA, CA 92081
TEL 760-607-2453 • ORDERLINE 800-261-1644 • FAX 760-598-7350 • WWW.ELECTRABIKE.COM
STEP 1:1
STEP 2:4-6
STEP 1:2
STEP 2:1-2 STEP 2:3