DTS surround encoder User Manual

Page 18

In the DTS Settings section, choose the

Bit Rate, Output type,

and

Dialog

Normalization

factor. (See step 4 on page 13 for explanation.)

3dB rear channel attenuation

is display-only here. This parameter is set in

the Packer. (See step 5 on page 8 for explanation.)

Bit Rate

and

Output type

fields are automatically determined by the sample

rate of the source material.

For 44.1 kHz and 88.2 kHz source files, only one bit rate (1234800) and
output type (.wav) are possible.

With 48 kHz source files for DVD encoding,

Bit rate

is selectable: 1509750

bits (1.5 Mbps) or 754500 (754 kbps).

With 48 kHz source files,

Output Type

is also selectable:

■

DTS wave format .wav (Intel byte order, wav header)

■

DTS padded format .dts (raw file, no wave header, Motorola format, and zero
padding to fill frames)

■

DTS compacted format .cpt (Motorola byte order, zero padding is removed,
timecode is removed but a start time is present)

Dialog Normalization:

see definition on page 13 under step 4.

3 dB rear channel attenuation

is display-only here. This parameter is set in

the Packer. (See step 5 on page 8 for explanation.)

Matrix ES channels

and

Phase Shift

for ES encoding, see step 4, page 13.

For more information, see the topic

DVD Authoring for DTS

on page 20.

DTS Pro Series Surround Encoder

– Installation and User Manual