Bryant 580D - Manual

Standard-Efficiency Rooftop Units with:
• Exclusive integrated gas control board with diagnostics
• Alumagard™ heat exchanger coating
• Induced-draft fan for gas combustion
• Tubular, dimpled heat exchangers
• Pre-painted galvanized steel cabinet for long life and quality
appearance
• Commercial strength baserails with built-in rigging capability
• Convertible design for horizontal supply/return
• Non-corrosive, sloped condensate drain pan, meets ASHRAE
62-89 (IAQ)
• Two-inch return-air filters
• A wide assortment of factory-installed options available, in-
cluding high static drives that provide additional performance
range
FEATURES/BENEFITS
Every compact one-piece unit arrives fully assembled, charged,
tested, and ready to run.
INTEGRATED GAS UNIT CONTROLLER (IGC) (All Models)
— All ignition components are contained in the compact IGC
which is easily accessible for servicing. The IGC control board,
designed and manufactured exclusively for Bryant rooftop units,
provides built-in diagnostic capability. An LED (light-emitting di-
ode) simplifies troubleshooting by providing visual fault notifica-
tion and system status confirmation.
The IGC also contains an exclusive anti-cycle protection for gas
heat operation. After 4 continuous cycles on the unit high-
temperature limit switch, the gas heat operation is disabled, and
an error code is issued. This feature greatly improves reliability
of the rooftop unit.
580D036-072
580D090-150
579F180,216
579F240,300
COMMERCIAL
SINGLE PACKAGE ROOFTOP
GAS HEATING/ELECTRIC COOLING UNITS Model 579F/580D
Sizes 036-300
3 to 25 Tons
Form No. PDS 580D.36.8