Blount 633GC User Manual

Page 9

633GC OPERATOR’S MANUAL

P/N 70944 Feb 06

SET-UP

STEP 1
Loosen side cover nuts and remove side
cover.

GUIDE BAR AND DIAMOND CHAIN INSTALLATION

STEP
Mount the diamond chain on the guide bar
starting at the drive sprocket and continue
over the guide bar nose.

Install the diamond chain correctly.

If using a single bumper chain, the

bumper must always lead the segment

into the cut as shown here.

STEP 4
Install the side cover.

STEP 2
Place bar onto studs and chain adjustment
pin.