Brother FAX-335MC - Manual (Page 58)

7 - 7 Q U I C K - D I A L N U M B E R S A N D D I A L I N G O P T I O N S
2
Press Function/Set , 3 , 9 to select ON or NEXT FAX ONLY and press
Function/Set .
• If you select ON, the screen displays to choose additional setting and press 2 to go to
Step 3.
• If you select NEXT FAX ONLY, then select NEXT FAX:ON and press
Function/Set .
The screen displays to choose additional setting and press 2 to go to Step 3.
3
Enter the One Touch and Speed Dial numbers (one after the other) or a Group Number
you have stored.
4
Press Start . The fax machine stores the original in memory, then transmits it to all the
numbers you entered.
Pause
Press Redial/Pause to insert a pause between numbers. Each key press adds a 3.5
second delay.
Hold
1
Press Hold to put a call on Hold.
2
You can put down the handset without disconnecting the call.
3
Pick up the fax machine handset—OR—Press Speaker Phone (For FAX-335MC
only) to release the call from Hold. Picking up an extension handset will not release
the call from Hold.
Tone/Pulse
If you have pulse dialing service, but need to send tone signals (for telephone banking,
for example), follow the directions below. If you have touch tone service, you do not
need this feature to send tone signals.
1
Lift the handset.
2
Press # . Any digits dialed after this send tone signals.
3
When you hang up, the fax machine returns to pulse dialing service.
Press Stop during transmission to cancel the current fax broadcast.