Bowe, Bell + Howell 1400 - Manual (Page 39)

38
Clean the reflector sheet for the ending sensor.
• Remove dust on the reflector sheet of the
ending sensor with a cotton swab.
• The reflector sheet is behind the shaft.
Make sure that the sensor rollers are installed properly before closing the ADF door.
Close the ADF door. When you close the ADF door, close it
securely until the door is locked.
Do not slam the ADF door.
Clear the roller cleaning counter with the BBH User Utility.
• After cleaning the rollers, click Clear Counter button for After Clean Roller in the BBH User Utility .
See page Error! Bookmark not defined..
4
5
6
7
A – Reflector Sheet for Ending Sensor
B – Cotton Swab