BDI Avion 8521 - Manual (Page 3)

n
Model 8540-1, flat panel TV mount for Avion
models 8527 & 8529.
n
Available separately, this mount installs through
the top of cabinet and steel supports attach
securely within the base of the cabinet.
n
Attach flat panel TVs up to 55" with the
universal mount included with this system.
n
TV cables and power run through the supports
and into the cabinet where they exit to the
appropriate components or outlet.
n
TV height is adjustable on universal mount.
n
Sliding back panels allow for easy access to
rear of components and wiring.
n
Flow-through ventilation slots in back panel
promote air circulation.
n
Inset vertical panel in back center section provides
space for a power center and serves as the “wire
management hub” of the piece.
n
TV cables and power are neatly routed inside
through two wire management grommets in the
top of the cabinet.
n
Concealed wheels in the legs allow the cabinet
to easily roll away from the wall even when
loaded with components.
n
Levelers in the leg assembly allow adjustment
of front and rear height. Leveler adjustors are
conveniently located inside the cabinet, for
easy access.
n
If desired, levelers may be fully extended, lifting
the cabinet off of its wheels so it no longer rolls.
Back Panels & Wire Management Wheels & Levelers in Legs Optional Universal Mount
Concealed Wheels
Easily Adjustable Levelers
Quality Hardware including
Easy-Adjust Hinges
Fabric Insert for Center Speaker
Compartment
for Media and
Speaker Storage
Steel Reinforced Top
Flow-through Ventilation
for Maximum Performance
Sliding Rear Panels for Easy
Access to Cables and Components
Optional Flat Panel TV Mounting System
(Sold separately, model number: 8540-1)
IR Friendly Smoked Glass
Adjustable Shelves
Vibration Canceling Shelf Support Pins
Satin Nickel Finish
Fabric inserts available
for use with Side Speakers
(not shown)