Brother FAX-727 - Manual (Page 17)

8
FAX-717/727 Control Panel Overview
(FAX-727 panel is the same as FAX-717)
4 5 6 10 8 9
12
11
13
2
3
7
1
1 LCD (Liquid Crystal Display)
Displays messages to help you set up and
operate your machine.
2 Hook
Lets you dial telephone and fax numbers
without lifting the handset.
3 Dial Pad
Dials phone and fax numbers and can be
used as a keyboard for entering
information into the machine.
# key lets you switch the dialling type
during a telephone call from "PULSE" to
"TONE". (Not available in New Zealand)
4 Redial/Pause
Re-dials the last number called. Also
inserts a pause in autodial numbers.
5 Search/Mute
Lets you dial stored phone numbers by
pressing
# and a two-digit number or lets
you look up numbers stored in the dialling
memory. Also, lets you put calls on hold.
6 Recall
Use this key to gain access to an outside
line and/or to recall the operator or
transfer a call to another extension when it
is connected to a PABX. (Australia &
New Zealand only)
7 Receive Mode
Use to select how the machine will handle
incoming calls.
8 Resolution
Sets the resolution when you send a fax or
make a copy.
9 Stop/Exit
Stops a fax, cancels an operation or exits
from Menu mode.
0 Fax Start
Starts an operation, such as sending a fax.
A Copy/Reports
With document in the Automatic
Document Feeder: Makes a copy.
Without document in the Automatic
Document Feeder: Lets you access the
Reports menu so you can select a report to
print: HELP LIST, QUICK-DIAL,
FAX JOURNAL, XMIT VERIFY,
TEL.INDEX, USER SETTINGS and
MEMORY STATUS List.
B One Touch Dial Keys
These four keys give you instant access to
previously stored phone numbers.