Belkin PLAY N600 - Manual (Page 19)

19
GettiNG to KNoW Your router
a) router status light
Your router’s status is shown by the light on the front .
off: the router is not plugged into a power source .
blinking Green: the router is starting up .
solid Green: the router is connected to the internet .
blinking amber: either the aDsl (rJ11) cable
is not plugged in, or there is no signal .
b) Wi-fi Protected setup (WPs) light and button
the WPs button on the front of your router can be used to
help establish a secure connection between your router and
other WPs-enabled Wi-Fi devices such as computers . to use
the WPs feature on your router, see “Getting started > adding
computers to Your network > using the WPs Button” .
the small light near the WPs button shows what is happening
while you are using WPs to establish a connection .
off: idle
blinking Green: the router is listening for a
WPs-enabled computer or other device .
solid Green: the router has made a secure
connection with the computer or other device .
amber: a connection was not created .
front Panel
(a)
(b)