Pioneer DVH-P5000MP - Manual (Page 6)

Connecting the Units
En 6
Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC). Blue/white (6*)
System remote control
Subwoofer output
or non fading Output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
Front output
(FRONT OUTPUT)
Note
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6*
and 7* when Pin 5 is an antenna control type.
In another type of vehicle, never connect 6*
and 7*.
Note
When you connect DEQ-P7000 to this unit,
separately sold power amp must be connected
to DEQ-P7000.
When you connect separately sold
multi-channnel processor (DEQ-P7000)
to this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
Rear audio output
(Refer to pages 8 – 11.)
This product
Optical input
IP-BUS input (Blue)
(Refer to page 4.)
Antenna jack
(Refer to page 4.)
15 cm
15 cm
Connecting to separately sold power amp