Pioneer AVH-X8500BT - Manual (Page 4)

When connecting to separately sold power amp
Right
Subwoofer Subwoofer
This product
Blue/white (5*)
System remote control
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 5* and
6* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 5* and 6*.
Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
Perform these connections when
using the optional amplifier.
Front speaker Front speaker
Rear speaker Rear speaker
Left
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Connect with RCA cables
(sold separately)
Subwoofer
output
Front output
Rear output
To front output
To rear output
To subwoofer
output
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
When connecting the external video component and the display
External video component
(sold separately)
Display with RCA input
jacks (sold separately)
To video
input
To video
output
To audio
outputs
This product
RCA cables
(sold separately)
Mini pin plug cable
(sold separately)
To audio
inputs
Rear audio output
(REAR AUDIO OUT)
Rear monitor output
(REAR VIDEO OUTPUT)
Video input
(REAR VIDEO INPUT)
Audio inputs
(REAR AUDIO INPUT R)
Audio inputs
(REAR AUDIO INPUT L)
RCA connector
10 cm
! It is necessary to change AV Input in the
system menu when connecting the external
video component.
This product ’s rear video output and rear audio
output are for connection of a display to enable
passengers in the rear seats to watch the DVD,
etc.
WARNING
! Never install a rear display in a location that is
visible to the driver while the vehicle is in motion.
Connecting the units
4
Section
Connecting the units
En
01
4