beautypg.com

Pausing playback, Searching for the part you want to play, Changing audio language during playback – Pioneer AVH-P4100DVD User Manual

Page 25: Multi-audio), Playing dvd discs

background image

Notes

! There is no sound during slow motion play-

back.

! With some discs, images may be unclear dur-

ing slow motion playback.

! Reverse slow motion playback is not possi-

ble.

Pausing playback

% Touch f during playback.

# To resume playback at the same point that you
turned pause on, touch f again.

Searching for the part you
want to play

You can use the search function to find the
part you want to play.
For DVD video, you can select

Title (title),

Chapter (chapter), Time (time) or 10key (nu-
meric keypad).
For DVD-VR, you can select

Title (title),

Chapter (chapter) or Time (time).
! Chapter search and time search are not

possible when disc playback has been
stopped.

1

Touch Search.

2

Touch the desired search option (e.g.,

Chapter).

3

Touch 0 to 9 to input the desired num-

ber.

# To cancel the inputted numbers, touch C.
# In the time search function, to select 1 hour
11 minutes, convert the time into 071 minutes 00
seconds and touch

0, 7, 1, 0 and 0 in that order.

4

Touch

.

This starts playback from the selected part.

Note

With discs featuring a menu, you can also touch
Menu or Top Menu and then make selections
from the displayed menu.

Changing audio language
during playback (Multi-audio)

DVDs can provide audio playback with differ-
ent languages and different systems (Dolby Di-
gital, DTS etc.). With DVDs featuring multi-
audio recordings, you can switch between lan-
guages/audio systems during playback.

% Touch Audio during playback.
Each time you touch

Audio it switches be-

tween audio systems.

Notes

! With some DVDs, switching between lan-

guages/audio systems may only be possible
using a menu display.

! You can also switch between languages/audio

systems using

Setup. For details, refer to Set-

ting the audio language on page 50.

! Only digital output of DTS audio is possible. If

this unit

’s optical digital outputs are not con-

nected, DTS audio will not be output, so select
an audio setting other than DTS.

! Display indications such as Dolby D and

5.1 ch indicate the audio system recorded on
the DVD. Depending on the setting, playback
may not be with the same audio system as
that indicated.

! Touching Audio during fast forward/fast re-

verse, pause or slow motion playback returns
you to normal playback.

Playing DVD discs

En

25

Section

06

Playing

DVD

discs