Pioneer AVH-P3100DVD - Manual (Page 77)

# When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speakers only.
# When selecting FM as the source, you cannot
switch to
Source Level Adjuster.
# When playing other than the DVD disc, you
cannot switch to
Dynamic Range Control.
# When neither Front-L nor Front-R is selected
in
Position, you cannot switch to
Time Alignment.
# When both the center speaker and the rear
speaker are set to OFF in the speaker setting, you
cannot switch to
Dolby Pro Logic II.
2 Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touch Back.
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1 Touch Position on the DSP function
menu.
2 Touch c/d/a/b to select a listening po-
sition.
Touch one of these, c/d/a/b, to select a lis-
tening position as listed in the table.
Key Display Position
c Front-L Front seat left
d Front-R Front seat right
a Front Front seats
b All All seats
# To cancel the selected listening position,
touch the same key again.
Note
When you make adjustments to the listening po-
sition, the speaker outputs are automatically set
for appropriate levels. You can tailor the levels
more precisely referring to Adjusting the speaker
output levels using a test tone or Adjusting the
speaker output levels.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Touch Fader/Balance on the DSP func-
tion menu.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
Front:25 to Rear:25 is displayed as the front/
rear speaker balance moves from front to rear.
# FR: 0/LR: 0 is the proper setting when only
two speakers are used.
3 Touch c or d to adjust left/right speak-
er balance.
Each time you touch c or d it moves the left/
right speaker balance towards the left or the
right.
Left:25 to Right:25 is displayed as the left/
right speaker balance moves from left to right.
Using the sound field control
The SFC function creates the sensation of a
live performance.
Available accessories
En
77
Section
19
A
vailable
accessories