Brother Laser Printer HL1660e - Manual (Page 435)

2001/10/02
APPENDIX D REFERENCE LIST OF MX-2000/4000/5000 SERIES UNIQUE COMMANDS - 9
3.1.6. PS mailbox protection & bin number setting
Command
# setoutputprotect
< #>> setpagedevice
Parameter
#
• Lower unit: #1 to 5 from bottom to top
• Lower unit + Upper unit: #1 to 10 from bottom to top
#1 to 4 from bottom to top
Default = 0
Explanation
•
This operator sets the bins with numbers larger than the TrayNumber specified as mailbox use only. They
cannot then be used for either stacker or sorter functions.
•
If the bin number is set to 0, the mailbox protection is released, then all bins can be used for stacker and sorter
functions.
•
If the bin number is set out of the effective range, this operator is ignored.
Setting type Effective range
• MX not installed 0
• Lower unit installed 0, 1
∼
5
• Lower & upper unit installed 0, 1
∼
10
Setting type Effective range
• MX not installed 0
• MX installed 0, 1
∼
4
(HL-2060)
This operator is registered in ‘statusdict’.
statusdict begin
5 setoutputprotect
end
(HL-2460/3260)
< 4>> setpagedevice