beautypg.com

General functions and controls, A. top unit controls (figure 3) – American Audio PRO DJ 3 User Manual

Page 6

background image

GENERAL FUNCTIONS AND CONTROLS

American DJ

®

AUDIO • PRO DJ3™ INSTRUCTION MANUAL • PAGE 6

A. TOP UNIT CONTROLS (FIGURE 3)

1. MEMORY CUE - Pressing the MEMORY CUE
button after loading a new disc and before closing
the tray, will restore any Cue memory that may be
stored on that disc. A maximum of six (6) Cue
points can be stored on a disc and a maximum of
40 Cue points can be stored in the players mem-
ory. When closing the tray door the “STORE” will
be displayed in the LCD indicating that the MEM-
ORY CUE button has been pressed and any sam-
pled loops or Cue points stored in memory will be
recalled.

2. CUE BUTTONS 1-6 - These button are used
to store six (6) cue points or six (6) samples.
There are seven (7) independent cue points that
can be stored into memory, six (6) on Cue buttons
1-6 and one (1) on the main CUE BUTTON (10).

3. PROGRAM - This button allows you to enter
program mode. If a CD is playing, pressing this
button will stop the CD and enter into the program
mode. Note the word “PROGRAM” is indicated in
the LCD DISPLAY (21). After programming your
tracks pressing the PLAY BUTTON (9) will play

your tracks in the order they were programmed.
To exit and erase a program, hold the program
button down for more than 2 seconds while the
unit is in pause or cue mode.

4. OPEN/CLOSE - (Transport Tray Open/Close)
Pressing this button will open and close the trans-
port tray allowing you to load or eject a CD.
NOTE: The tray will not open unless the player is
in cue or pause modes to prevent accidentally
opening the tray door when a disc is playing.

5. SGL/CTN - This function allows you to choose
between single track play or continuous track play
(all tracks in order). This function also operates in
PROGRAM and FLIP FLOP modes.

6. TIME BUTTON - The TIME button will switch
the time value described in the TIME METER (44)
between ELAPSED PLAYING TIME, TRACK
REMAINING TIME, and TOTAL REMAINING
TIME.

7. JOG WHEEL - (INNER WHEEL) This jog
wheel serves two functions depending on the
operating mode you are working in.
A. The jog wheel will act as a slow frame search

3

12

11

9

17

8

7

6

5

4

10

14

13

19

18

21

22

2

1

20

23

24

25

27

26

29

28

15 16

Figure 5

Figure 4

Figure 3