Audiovox FR-1538 - Manual (Page 19)

19
1. Press the Function (F) button until NOA appears on the display.
2. Press the Up Button (8) or the Down Button (12) until Alt appears flashing
on the display; then press the Enter (
) Button (9).
3. Press the Function button to return to normal radio operation.
The radio is now in the NOAA alert mode, awaiting for a weather alert on one of the
NOAA weather channels you have selected.
Warning
• Remove the batteries from the transceiver if it is not expected to be used for
long periods. This will eliminate the possibility of chemicals leaking from the
batteries and corroding the transceiver.
• Avoid exposing the transceiver to water or extremes of temperature.
• Do not use this device in or near a mining facility, which uses remotely trig-
gered explosives or in areas labeled “Blasting Area”. Premature or accidental
detonation may result.
• Do not attempt to modify or in any way increase the output of this transceiver. Its
output is designed to meet the legal limits set by the F.C.C.
• Do not use this device or change its batteries in potentially explosive
atmospheres as sparks in such areas could result in an explosion.
• Turn your transceiver off wherever posted notices restrict the use of radios or
cellular telephones. Facilities such as hospitals may use equipment that is
sensitive to RF energy.
• Turn your transceiver off on board aircraft when requested to do so.
• Do not place your radio in front of a vehicle’s air-bag. If the air-bag deploys,
it could propel the transceiver like a projectile causing bodily injury.
This transceiver complies with F.C.C. regulations for use in the United States of
America. Use in other countries may be prohibited or restricted by local regulation.
Please check with the local regulating agency before using this device outside
the United States of America.