Anritsu MP1763C - Manual (Page 59)

4-25
4.4.4 File deletion
Insert the floppy disk into the floppy disk drive and select
the file name to be deleted.
Press the SHIFT key.
Delete the file with the displayed file name by pressing the
DELETE key.
(Verification)
Execute a DIR command.
Verify that the file name deleted is not displayed by press-
ing the keys.
4.4.5 Error messages
When a floppy disk error occurs, error codes E0 to E9 are displayed on the file name display. For the error codes, see Table
4.4.5-1 “Error Messages”. An error message can be cleared by pressing the keys.
Table 4.4.5-1 Error Messages
Error
E0
E1
E2
E3
E4
E5
E6
E7
E8
E9
Error contents
Media error (formatting, media error)
Write protection error (protection error when writing)
File full (insufficient writing space)
File not found (specified file not found when reading)
File exists error (saving of same file attempted)
Write error (write-disabled error)
Read error (read-disabled error)
File type, File error (file type or file contents error)
FD error (other errors)
Hardware error (hardware trouble error)
4.4 MEMORY (Floppy Disk)