Audiovox DETACHABLE FRONT PANEL AM/FM/MPX RADIO WITH AUTO-REVERSE CASSETTE PLAYER User Manual
Page 7
6
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
Within 5 seconds of choosing the Balance mode,
press the
side of the Level control
2
to adjust the
stereo balance to the left channel speakers or the
side of the control to adjust it to the right channel
speakers. The balance position will be shown on the
display panel from “BA.L 10” (full left) to “BA.r 10” (full
right). When the volume level between the left and
right speakers is equal, “BAL 0” will be shown on the
display panel. The display will automatically return to
the normal indication 5 seconds after the last
adjustment or when another function is activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select
the Fader mode by pressing the Select button
3
so
the “FAd” indication appears on the display panel.
Within 5 seconds of choosing the Fader mode, press
the
or
side of the Level control
2
to adjust the
front-rear speaker balance as desired. The fader
position will be shown on the display panel from
“FA.r 10” (full rear) to “FA.F 10” (full front). When the
level between the front and rear speakers is equal,
“Fad 0” will be shown on the display panel. The
display will automatically return to the normal
indication 5 seconds after the last adjustment or
when another function is activated.
8
LOUDNESS CONTOUR (LOU)
When listening to music at low volume levels, this
feature will boost the bass and treble ranges to
compensate for the characteristics of human hearing.
Press the button to activate this feature and the
indication “LOUD” will appear on the display panel.
Pressing the button again will deactivate the feature
(the “LOUD” indication will disappear from the display
panel).
9
AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the volume
from the system (“MUTE” will appear on the display
panel). Pressing the button again or adjusting the
Volume control
2
will return to the volume level
setting in use before the Mute function was activated.
bl
AM/FM BAND SELECTOR (BND)
Each time this button is pressed, the radio band is
changed. The indications “AM1”, “AM2”, “FM1”,
“FM2” or “FM3” will appear in the display panel
according to your selection.
bm
MANUAL UP/DOWN TUNING ( / )
To manually select a radio station, momematrily
press the Up Tuning ( ) button to advance the unit
one digit higher or the Down Tuning ( ) button to tune
downward. Pressing either button for longer than 0.5
seconds will cause the radio to tune rapidly in the
selected direction until the button is released.
bn
AUTOMATIC SEEK TUNING (SEEK)
During radio operation, this function is used to search
for stations automatically. By pressing the button,
the radio will seek the next station and stop at that
frequency. The Seek function can be stopped by
pressing the button again or activating any other
tuning function.
bo
LOCAL/DISTANT SELECTOR (LOC)
This feature is used to select the strength of the
signals at which the radio will stop during Automatic
Seek Tuning. Pressing the button will select the
Local setting (“LOC” will appear on the display panel)
and only strong (local) stations will be received.
Pressing the button again will select the Distant
setting (“LOC” will disappear from the display panel)
and the radio will stop at a wider range of signals,
including weaker (more distant) stations.
bp
FM MONO/STEREO SELECTOR (M/S)
During FM radio operation, this button is used to
select mono or stereo reception of the broadcast
signal. Under normal reception conditions, the unit
should be left in the stereo mode as indicated by the
“ST” on the display panel when tuned to an FM stereo
signal. If the stereo signal is too noisy for comfortable
listening, press the FM Mono/Stereo Selector button
to switch to mono reception (the “ST” indication will
disappear from the display panel). To return to
stereo reception mode, press the button again so
that the “ST” indication appears on the display panel.
bq
PRE-SET SCAN (PS)
AUTO-STORE TUNING (AS)
Press this button momentarily to scan the stations
pre-set into the memories on the 3 FM bands or 2 AM
bands. The unit will stop at each pre-set station for
5 seconds before continuing to the next pre-set
station (the pre-set number on the display panel will
flash during Pre-Set Scan operation). Press the
button again momentarily to stop Pre-Set Scan