Prevue Pet 2153 - Manual

Step 1&2: Insert
stand frame (Piece
A & B) onto the 4
posts of the bottom
frame. Should now
have a square frame.
Insert casters
Step 8: Bolt
perch into
inside of cage
using wing nuts
and washers
Step 9: Insert
play-top into each
of the panel slots.
See picture B
Step 12:
Place top cup
holder onto
bracket. Thread
(longer) screws
through cup
holder and ladder
on opposite side
& secure with
nuts
Step 3: Insert
bottom pan into
front slot. Insert
grill
Step 4:
Place front
panel on top
of square
frame by
placing posts
into openings
Step 6:
Repeat Step 4
for
back panel
Step 5:
Repeat Step 4
for side panel
Step 7: Repeat
Step 4 for side
panel. Insert
interior cup
brackets into
slots. Make sure
cup doors are
open while
installing
Step 10: Insert
perch top bracket
onto top of cage
using (shorter)
screws. Secure with
nuts & a phillips
head screwdriver
Step 11: Insert
(shorter) screws
through ladder into
top of frame and
secure with nuts.
Slide top pan into
front slot
Final Step: Insert
seedguards into
slots on bottom
frame of cage.
Secure by locking
attached pin into
slot on adjoining
seedguard. Place
cups in holders
B Assembly Instructions for Prevue Hendryx
   
Econo KD Signature Series Line (Models 2151-2153)
Congratulations! You have made a wise decision by purchasing this precision engineered bird home
that will provide you years of enjoyment.
Prevue Pet Products, Inc. [email protected] 312-243-3624 / 800-243-3624
A B
RV - 042003
B
Step 10: Press
firmly until
flush with cage
body