MSI MS-9A08 - Manual (Page 36)

3-4
MAINBOARD SETUP
▍
m
emOry
These DIMM slots are intended for memory modules.
Installing Memory Modules
Locate the DIMM1 SO-DIMM slot. Align the notch on the DIMM with the key
on the slot and insert the DIMM into the slot at 45-degree angle.
Push the DIMM gently forwards until the slot levers click and lock the DIMM in
place. Follow the same procedures to install the second DIMM if necessary.
To uninstall the DIMM, flip the slot levers outwards and the DIMM will be
released instantly.
Important
You can barely see the golden finger if the DIMM is properly inserted in the
DIMM slot.
To enable successful system boot-up, always insert the DIMM into the DIMM1
first.
1.
2.
3.
•
•
DDR2 SO-DIMM Slot
200-pin, 1.8V