iRobot Scooba 390 Series - Manual (Page 7)

12 iRobot Scooba Owner’s Manual
en
www.irobot.com 13
en
Scooba’s Tank
Scooba’s tank is completely removable from the robot base. Scooba has a
unique two-chamber tank design that ensures fresh cleaning solution never
mixes with the dirty water Scooba picks up as it cleans.
Clean Tank
The Clean tank holds the cleaning solution and water that Scooba uses to
clean the floor. Fill the Clean tank with water and 7ml (1 capful or 1 packet)
of Scooba cleaning solution natural enzyme formula or 60 ml of white
vinegar. Fill the Clean tank before cleaning with Scooba.
1
Press handle to
remove tank.
2
Remove tank from
robot base.
3
Fill the Clean tank with
water and 7ml (1 capful
or 1 packet) of Scooba
cleaning solution natural
enzyme formula or 60 ml
of white vinegar.
4
Slowly fill the remainder
of the Clean tank with
warm or cold tap water.
Tilt the tank to ensure
it is completely filled to
the top.
5
Push the Clean tank
cap closed and place
tank back in robot.
6
Push firmly on tank
until you hear an
audible click.
Dirty Tank
Scooba puts down clean solution, gently scrubs the floor, and collects
all of the dirty solution into the Dirty tank. Empty and rinse the tanks after
every cleaning cycle.
1 Press handle to
release tank.
2 Remove tank from
robot.
3 Empty Dirty and
Clean tanks.
4 Rinse Dirty tank with
warm water.
5 Remove and rinse
Scooba’s filter and
vacuum port.
6 Place the tank back
in Scooba. Push down
firmly on the tank
until you hear an
audible click.
Do Not
Force
CauTIOn: use OnlY sCOOBa CleanIng sOluTIOn Or wHITe
VInegar. scooba cleaning solution is specially formulated for scooba.
Other solutions may damage scooba, causing corrosion of electronic
parts, excessive foaming, and poor traction. use of other solutions will
void the warranty. see page 14 for details.
CauTIOn: Fill with cold or luke-warm water only. Do not fill scooba’s
tanks with hot water.