Kramer Electronics SID-X2N - Manual (Page 11)

SID-X2N - Defining the SID-X2N Step-in Commander 7
7
Figure 2 defines the rear panel of the SID-X2N.
Figure 2: SID-X2N Step-in Commander Rear Panel
# Feature Function
1 AUDIO OUT 3.5mm Mini Jack Connect to an unbalanced, stereo audio acceptor (see Section 4 )
2 HDBT OUT RJ-45 Connector Connect to a compatible receiver, for example, the TP-580Rxr
using CAT 6 or higher specification cable
3 REMOTE STEP-IN
3-pin Terminal
Block LED Connect to the anode of the remote Step-In LED indicator
4 Switch Connect to the remote, Step-In switch, (see Section 5.1 )
5 PROG RS-232 3-pin Terminal
Block Connect to the PC via RS-232 to perform a firmware upgrade
6
REMOTE
SELECT 8-pin
Terminal Block
LED Connect to the anode of the remote Input Select LED indicator,
(see
Section 4 )
7 Switch Connect to the remote, Input Select switch, (see Section 5.2 )
8 LED HDMI,
DP, DVI
and UXGA Connect to the anodes of the remote input indicators
(see
Section 5.3 )
9 OPTION 8-way DIP-switch Sets the device behavior, (see Section 8.1 )
10 12V DC Power Connector Connect to supplied power adapter, center pin positive