Your vp-72 multiformat 1:2 distribution amplifier – Kramer Electronics VP-72 User Manual
Page 7
Your VP-72 Multiformat 1:2 Distribution Amplifier
5
Figure 3: Underside VP-72 Multiformat 1:2 Distribution Amplifier
Table 3: Underside VP-72 Multiformat 1:2 Distribution Amplifier Features
# Feature
Function
1 EQ. Trimmer
Adjusts
1
the equalization compensation level for the composite video outputs
2
2 Level Trimmer
Adjusts
1
the signal level for the composite video outputs
2
3 ID BIT Switch
Set to ON position
3
to select the ID BIT
2
4 EQ. Trimmer
Adjusts
1
the EQ. (equalization) compensation level for the component video
outputs (for channels Y, U, and V)
5 Level Trimmer
Adjusts
1
the signal level for the component video outputs (for channels Y, U, and V)
6 C Level Trimmer Adjusts
1
the chrominance output signal level for each s-Video output
2
7 Y Level Trimmer Adjusts
1
the luminance output signal level for each s-Video output
2
8 Y EQ. Trimmer
Adjusts
1
the equalization compensation level for each s-Video output
2
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the level
2 For channels A and B
3 Sometimes notebook computers refuse to output a VGA signal to an external VGA monitor if they do not detect the ID BIT
as ON. Set the ID BIT to ON using this switch so that the notebook will output to an external VGA monitor