Audio-Technica BP4073 - Manual (Page 2)

BP4073
SCALE IS 5 DECIBELS PER DIVISION
180˚
210˚ 150˚
90˚
12" or more on axis LEGEND
Frequency in Hertz
Response in dB
10 dB
100 50 200 10k 5k 1k 500 2k 20k
Roll-off
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
frequency response: 20–20,000 Hz
polar pattern
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0190-01
Specifications
Externally polarized (DC bias) condenser
Line + gradient
20-20,000 Hz
80 Hz, 12 dB/octave
–29 dB (35.5 mV) re 1V at 1 Pa
50 ohms
141 dB SPL, 1 kHz at 1% T.H.D.;
151 dB SPL, with 10 dB pad (nominal)
13 dB SPL
128 dB, 1 kHz at Max SPL
81 dB, 1 kHz at 1 Pa
48V DC, 4.8 mA typical
Flat, roll-off ; 10 dB pad (nominal)
99 g (3.5 oz)
233.0 mm (9.17") long,
21.0 mm (0.83") diameter
Integral 3-pin XLRM-type
SG2
AT8405a stand clamp for 5 /
8
"-27
threaded stands; 5 /
8
"-27 to 3 /
8
"-16
threaded adapter; AT8144 windscreen;
two o-rings; protective carrying case
Element
Polar pattern
Frequency response
Low frequency roll-off
Open circuit sensitivity
Impedance
Maximum input sound level
Noise 1
Dynamic range (typical)
Signal-to-noise ratio 1
Phantom power requirements
Switches
Weight
Dimensions
Output connector
Audio-Technica case style
Accessories furnished
In the interest of standards development, A.T.U.S.
offers full details on its test methods to other industry
professionals on request.
1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 dB SPL
1 Typical, A-weighted, using Audio Precision System One.
Specifications are subject to change without notice.
429