Australian Monitor AMIS31EQ - Manual (Page 7)

7
Back Panel AMIS215EQ/AMIS31EQ
1. Back Panel Section.
This section refers to the back panel for the AMIS31EQ. This section is
duplicated for channel 1 & channel 2 of the AMIS215EQ.
2. 6.35mm TRS Input Jack.
This line level input accepts a balanced 6.35mm TRS jack. The balanced
connector should be wired tip=Positive, Ring=Negative & sleeve=Ground.
3. Balanced XLR Input.
This input again accepts a line level signal with the XLR wired Pin2=Positive,
Pin3=Negative & Pin1=Ground.
1
2 3 4 5 6
7 8 9