Myron L TH1 - Manual (Page 21)

17
3. Fill pH sensor well with sample.
4. Press to measure sample and press to store
reading in location #3.
5. The next memory stored will go into location #8.
6. To clear all records: After
pressing , scroll down.
“CL
r
ALL” will be displayed
(see Figure 7).
7. Press . All records will be cleared.
X. TEMPERATURE FORMAT “Centigrade & Fahrenheit”
1. Press any measurement key.
2. Press repeatedly until either “C” or “F” is displayed.
(see Figures 8 and 9).
3. Press to switch units.
4. Press any measurement key to accept unit preference for all
temperature readings.
XI. TEMPERATURE COMPENSATION (TC) DISABLE
This feature allows the user to disable (turn OFF) the TC for specific
applications requiring uncompensated conductivity and TDS
measurements.
Figure 7
MEMORY
Figure 8 Figure 9