Beijer Electronics EPC TA100 AM EN User Manual

Page 33

Fault Tracing

The touch screen is malfunctioning or is not

responding at all

1. Re-calibrate the touch screen according to the

sec-

tion.

2. Check that the ﬂex cable is correctly ﬁtted.
3. Replace the display of the Panel PC according to the

section.

4. Check the touch interface on the power card.

Lines in display have wrong color or the display

picture is shifted

1. Check if the display has a wide vertical or horizontal area across the

display. It should be at least 2-3 cm wide with a grey or black color. See

for instructions on how to correct this.

2. Make sure the display cable is correctly ﬁtted.
3. Make sure the display cable is not folded or damaged in any way. Replace the

display cable according to the

section.

Beijer Electronics, MAEN043