Alpatronix KX101 Bluetooth ABS Chiclet Keyboard Folio Case and Stand for Apple iPad mini (fits all models) - Vegan Leather Smart Case with Wireless Keyboard - Manual (Page 7)

User Manual
7
Technical Specification:
Bluetooth Specification:
Version 3.0
Operation Current: <1.5mA
Standby Current: 0.5mA
Operation Voltage: 3.7V
Charging Voltage: 110-240V
Battery Type: Lithium Battery
Charging period: 2hours (For the first time, please charge for 12 hours)
Troubleshooting:
If you are unable to connect the keyboard to your iPad, follow the steps below:
l Check if the battery is low. When the battery is low, some keys react slowly or would not
respond at all. Charge the battery fully and try again.
l Check the power switch and make sure it is on. When it is on, the power light on the top
right-hand corner of the keyboard flashes for two seconds.
l Restart the Bluetooth switch, make sure your iPad can find this device.
l Ensure the password for pairing is correct.
l Try removing the pairing by going to the Bluetooth section of your iPad, choose Bluetooth
keyboard and select “Forget this Device.” Turn Bluetooth off for 3 seconds on your iPad, and
turn it back on. Repeat step III to reestablish pairing.