Audiovox AMP-604 - Manual (Page 8)

PWR
LOW INPUT HIGH LEVEL
GAIN
MIN MAX MIN MAX
GAIN
INPUT WIRING DIAGRAM
-6-
5-PIN
CONNECTOR
IMPORTANT
USE EITHER HIGH-LEVEL OR
LOW-LEVEL INPUTS, NOT BOTH.
HIGH-LEVEL
(SPEAKER) OUTPUTS CAR STEREO
RCA TYPE
SHIELDED CABLES
(NOT INCLUDED)
RIGHT REAR +
LEFT REAR +
RIGHT FRONT +
LEFT FRONT +
LOW-LEVEL RCA OUTPUTS
GREEN WHITE GRAY BROWN
LEFT FRONT
RIGHT FRONT
BLACK
CHASSIS GROUND ON RADIO
LEFT REAR
RIGHT REAR
TO CH1
TO CH3
TO CH2
TO CH4
NOTE: When using High-Level (Speaker) Outputs
of car stero, connect only the Positive (+)
wires to the amplifier. Do not use Negative (–)
Output wires (insulate ends with tape and
leave disconnected).